 |
 |
 |
|
No Drill Mounting Replacement Kit for GRIPP Grab Bars - 250lb Rated, (Grab bar not included)
nie wieder bohren (nodrillingrequired) Grab Bar Installation
- ADA compliant when used with nie wieder bohren grab bars
- Tested and Passed ASTM F446-85 Standard Consumer Safety Specification for Grab Bars and Accessories
- Copies of testing available
- Adapters have tested to 880lbs each in short term static load testing (each)
- Use on tile, natural stone, glass, metal, concrete, brick. Not recommended for use on plastics for the grab bars due to various material thickness, age & condition of plastics and general construction (may be thin walled plastic which is not attached well enough to support weight in the event of a fall) Set includes: 2 commercial grade adapter plates with foam adhesive ring, 6 stainless steel threaded screws, 6 stainless screw sleeves, 2 tubes of special adhesive, 2 red tube keys, 1- alcohol cleaning pad. Limited Warranty covers use only on nie wieder bohren approved grab bars. Plate size 2-11/16" (68mm), Hole spacing - 1-3/4" (45mm) on center, Plate thickness 3/16" (5mm) including the 1mm glue bead
Proper surface preparation is essential to a successful installation. All wax, sealant, grease, scaling, chemicals and debris must be removed prior to beginning the installation. Specific surface preparation instructions are included with the mounting hardware. Surface must be completely dry prior to installation. Only the supplied alcohol wipe or acetone can be used to clean the surface before initial attachment, no household chemicals.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- This German engineered and patented technology is the only one of its kind in the world. This system uses a simple 4 step installation process which takes just minutes to install. The adapter works on all hard surfaces such as tile, natural stone, glass, metal, concrete & brick. The system utilizes a single part adhesive which is resistant to heat, cold, UV. It can also be removed without any damage to the surface. The system is extremely strong and will last a lifetime when installed correctly. The only DIY grab bar solution! ADA compliant tested to ASTM specifications to 250lbs.
|
|
|
|
|
|
|
no drilling required
Easy Peezy 
So far so good