![](/v/vspfiles/templates/mwd/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
24" Premium Grab Bar, 1-1/4" Diameter, Stainless Steel construction, ADA Compliant 250lb rated, includes German made no drill mounting hardware- Gloss White
- 24" x 1-1/4" Diameter, 24" on Center, 27" end to end length, 304 Grade Stainless Steel, 18 Gage Material, ADA Compliant, ANSI tested and approved using the nie wieder bohren no drill fastening technology, Gloss White. Lifetime Warranty. Use on tile, natural stone, glass, metal, concrete, brick. Not recommended for use on plastics for the grab bars due to various material thickness, age & condition of plastics and general construction (may be thin walled plastic which is not attached well enough to support weight in the event of a fall) Set includes: 2 commercial grade adapter plates with foam adhesive ring, 6 stainless steel threaded screws, 6 stainless screw sleeves, 3 tubes of special adhesive, 3 red tube keys, 1-alcohol cleaning pad. Warranty covers use only on nie wieder bohren approved grab bars. Plate size 2-11/16" (68mm), Hole spacing - 1-3/4" (45mm) on center, Plate thickness 3/16" (5mm) including the 1mm glue bead
The nie wieder bohren mounting technology saves time, avoids damaging walls, prevents water damage behind walls, provides worry free installation and is removable with no damage to surfaces. The solid surface adapter (GB00002) attaches in minutes to all premium hard surfaces without drilling, protects your investment, provides a lifetime of solid performance. For drywall application use GB00004 adapter kit for stud mount. The GB00003 SNAP TOGGLER can be used with the GB00004 if studs are not available for both sides of bar.
|
|
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
Features
- This ADA compliant safety bar can be installed in minutes, no measuring, no drilling and no tools required! The patented nie wieder bohren no drill mounting hardware works for Tile, Ceramic, Marble, Granite, Stone, Glass, Brick, Glass, Metal. Works on rough or smooth surfaces, directly over grout lines and indoor or out. This premium grab bar is made of 304 stainless steel and has been tested with the no drill mounting technology and meets the ASTM F446-85 requirements to be ADA compliant. This is the only professional grade no drill technology approved for use on Grab Bars. Look for the nie wieder bohren logo to know you are buying the best. Simple, Safe, Secure.
|
|
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif) |
![](/v/vspfiles/templates/mwd/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/mwd/images/clear1x1.gif)
|